| Customization: | Available |
|---|---|
| Application: | Automatic Doors, Led Products, Audio / Video Players, Household Appliances, Security and Access Control |
| Battery Type: | Button Battery |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Remote Control Switch (RW0112) is a wireless single channel relay board with immature microprocessor. It is small, lightweight, and has a lower power consumption; ideal for retrofitting access control system to remote control electronic locks such as cabinet, cupboard door lock, garage door lock, lightings and home appliances.
Features
Provides 1x10A relay outputs
Built in 315MHZ RF receiver allows max 30 remote transmitters.
Easily adding transmitter by learning button
Three operation ways: Momentary/toggle/latched and can be switched by jumper.
Package Content
1 x Receiver
1 x Transmitter
This Unit "DOES NOT" comes with installation instruction, wiring cable, or screws.
Professional installation of qualified electrician is highly recommended.
Specification Of Receiver
Operation Voltage DC24V
Operation Current Less than 6mA
Output Current Less than 10mA
Receiving Frequency 315MHZ
Receiving Sensitivity -95dbm
Working Temperature -30C~+70C
Working Humidity 20%-90%R.H
Dimensions LxWxH 50mm*34mm*17mm
Gross Weight 0.2kg
Specification of Remote Controller
Operation Voltage DC24V
Operation Current Less than 12mA
Output Current More than 10mA
Working Frequency 315MHZ/433MHZ
Transmitting Power More than 10mW
Transmitting Distance 100M (Empty Space)
Transmitting Speed 50-60KHZ
Working Temperature -30C~+70C
Working Humidity 20%-90%R.H
Dimensions LxWxH 58mm*32mm*13mm
Gross Weight 0.2kg
Order Particular:
Model No Channel Frequency
RW0112 1 315MHZ/433 MHZ
RW0212 2 315MHZ/433 MHZ
RW0412 4 315MHZ/433 MHZ
RW0612 6 315MHZ/433 MHZ
RW0812 8 315MHZ/433 MHZ
RW1212 12 315MHZ/433 MHZ
Applications
Electronic Locks
Access control
Security Camera
LED Strip
Quick Guide for program:
To add remote controller
Press the LEARN BUTTON and release when LED is on
Press any button on the remote control within 20S after above step, the LED flashes and then release the button, LED goes off. The remote is added successfully.
To erase remote controller
Hold the LEARN BUTTON for 6s till the LED goes off. All paring information with remote is erased.
){kind=link}